Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
1
/
of
10
1610 Pelican™ Protector Case
1610 Pelican™ Protector Case
SKU:1610-021-110
Regular price
$243.50
Regular price
Sale price
$243.50
Unit price
/
per
Shipping calculated at checkout.
17 in stock
| Product | MSRP | MAP |
| With Foam | $400.50 | $325.95 |
| No Foam | $336.00 | $259.95 |
| With Padded Dividers | $493.50 | $367.95 |
| With Trekpak | $532.50 | $430.95 |
Sensitive equipment needs protection, and since 1976 the answer has been the Pelican™ Protector Case. These cases are designed rugged, and travel the harshest environments on earth. Against the extreme cold of the arctic or the heat of battle, Pelican cases have survived.
Made in the USA, these tough cases are designed with an automatic purge valve, that equalizes air pressure, a watertight silicone O-ring lid, over-molded rubber handles and stainless steel hardware.
KEY FEATURES
- Strong polyurethane wheels with stainless steel bearings
- Watertight, crushproof, and dustproof
- 3 level Pick N Pluck™ with convoluted lid foam
- Automatic Pressure Equalization Valve - balances interior pressure, keeps water out
- Easy open Double Throw latches
- Fold down handles
- O-ring seal
- Open cell core with solid wall design - strong, lightweight
- Retractable extension handle
- Stainless steel hardware and padlock protectors
- Lifetime Guarantee of Excellence
- Made in the USA
SPECIFICATIONS
Exterior Dimensions: 24.83" x 19.69" x 11.88"
Interior Dimensions: 21.78" x 16.69" x 10.62"
Lid: 2.05"
Bottom: 8.57"
Int Volume: 2.23 ft³
Padlock Hole Diameter: 5/16"
Weight with foam: 22.30 lbs
Weight without foam: 19.50 lbs
Buoyancy: 119.93 lbs
Interior Dimensions: 21.78" x 16.69" x 10.62"
Lid: 2.05"
Bottom: 8.57"
Int Volume: 2.23 ft³
Padlock Hole Diameter: 5/16"
Weight with foam: 22.30 lbs
Weight without foam: 19.50 lbs
Buoyancy: 119.93 lbs
ADDITIONAL INFORMATION
Body Material: Polypropylene
Latch Material: ABS
O-Ring Material: Polymer
Pins Material: Stainless Steel
Foam Material: 1.3 lb Polyurethane
Purge Body Material: ABS
Purge Vent Material: 3 Micron Hydrophobic Non-Woven
Foam Layer 1 (Lid): 2.00" - Convolute
Foam Layer 2 (Base): 1.50" - Pad
Foam Layer 3 (Base): 2.38" - Pick N Pluck
Foam Layer 4 (Base): 2.38" - Pick N Pluck
Foam Layer 5 (Base): 2.38" - Pick N Pluck
Latch Material: ABS
O-Ring Material: Polymer
Pins Material: Stainless Steel
Foam Material: 1.3 lb Polyurethane
Purge Body Material: ABS
Purge Vent Material: 3 Micron Hydrophobic Non-Woven
Foam Layer 1 (Lid): 2.00" - Convolute
Foam Layer 2 (Base): 1.50" - Pad
Foam Layer 3 (Base): 2.38" - Pick N Pluck
Foam Layer 4 (Base): 2.38" - Pick N Pluck
Foam Layer 5 (Base): 2.38" - Pick N Pluck
Invalid password
Enter